In industrial production, the high pressure supply failure of screw air compressor is a common problem。This will not only cause the normal operation of the equipment to be affected, but also may cause serious damage to production efficiency and product quality。So, how to solve the problem of high pressure supply of screw air compressor？本文Atlas Wuxi screw compressorXiaobian will provide you with four effective solutions。

Step 1: Check the pressure switch

The pressure switch is the most important component that controls the gas supply pressure of the device. If it fails, the gas supply pressure may be too high。After turning off the power supply, manually adjust the setting value of the pressure switch to check whether the device can work normally。If the problem still does not resolve, you may need to replace the pressure switch。

Step 2: Check the exhaust valve

The main function of the exhaust valve is to adjust the gas supply and pressure of the equipment, if there is a failure, it may lead to too high gas supply pressure。The check method is to manually open or close the exhaust valve to observe whether the working state of the equipment is improved。If the problem still does not resolve, the exhaust valve may need to be replaced。

Step 3: Check the oil and gas separator

The role of the oil and gas separator is to remove the oil mist and water in the compressor, and if it fails, it may cause the supply gas pressure to be too high。The inspection method is to remove the filter element of the oil and gas separator for cleaning or replacement, and then reinstall the filter element to observe whether the working state of the equipment has been improved。If the problem still does not resolve, the oil and gas separator may need to be replaced。

Step 4: Adjust system parameters

According to the use of the equipment and environmental conditions, reasonable setting of gas supply pressure, temperature and other parameters can effectively avoid the problem of high supply pressure。The adjustment method can be carried out by the control system of the screw air compressor, or it can be operated by a professional。

The key to solve the problem of high supply pressure of screw air compressor is to find the root cause of the problem and take effective measures to repair it。By checking the pressure switch, exhaust valve, oil and gas separator and adjusting the system parameters, we can effectively solve this problem to ensure the normal operation of the equipment and the smooth progress of production。